Guide: Back up and restore your VMs using Altaro VM Backup v.7
For the past few months, my conscience has been bugging me about backing up my VMs on my host. This something that I postponed every week, but a few weeks ago I was contacted by my blog sponsor Altaro who asked me if I wanted to write a guide and short review of their product: Altaro VM Backup. Perfect, I thought, as I would finally be backing up my VMs 🙂
Here is a short feature list of Altaro VM Backup (source: http://www.altaro.com/vm-backup/features.php)
- Support VMWare & Hyper-V backups
- Augmented inline deduplication
- Leverages Microsoft VSS
- Backup to local drive, network share or offsite backup
- Windows Server 2016 support
- Possibility to encrypt backuped up VMs
- Full support for Cluster Shared Volumes & VMware vCenter
- Instantly boot any VM version from the backup location without affecting backup integrity.
- Browse through your Exchange VM backup’s file system and restore individual emails
- Granular Restore Options for full VM or individual files or emails
- Restore an individual or a group of VMs to a different host
- Easily test the integrity of your backups for peace of mind
Download Altaro VM Backup
Download the 30-day unlimited trial here: http://www.altaro.com/vm-backup/download.php
Starting Altaro VM Backup
Following the installation of Altaro VM Backup, it is time to start the application. Search for Altaro VM Backup and run it.
You are greeted by a welcome screen where you will need to select which Management Console to connect to. It is possible to either connect to your local machine or to a Remote Machine. In my case, I will be connecting to the local machine.
Create VM backup
1. Create backup location
Upon launching the Management Console, the first thing we will need to do is to add a backup location. In the screenshot below, I have already added a backup location. To add a backup location, simply press Add Backup Location as marked in the screenshot.
Now you are presented with two options: Physical Drive or Network Path.
Select Physical Drive if you wish to store the VM backups on a internal or external hard drive.
Select Network Path if you wish to store the VM backups on a network location, such as a NAS.
In my case, I added a Physical drive as the backup location.
Altaro VM Backup also supports Offsite backup. In order to create an Offsite backup location, select Add Offsite location to the far right of the same window.
You are now prompted with several options. Select one of the following and press Next.
Note: Altaro Offsite Server is required in order to replicate VMs to a remote backup location. You will need to download and install the Altaro Offsite Server on the remote machine which will host the backups.
2. Add VMs to backup location
Once you have created the backup location and you have returned to the Backup Locations node, simply drag and drop the VMs to the backup location.
3. Configure schedule
The next step is to create a backup schedule for your VMs in order to ensure that your machines are backed up on a regular basis automatically.
Create a schedule that fits your liking and drag and drop your VMs to the Backup Schedule of your choosing.
4. Configure retention policy
Now you will need to determine how long you wish to keep your backups. I will leave the default option, which is two weeks.
5. Configure advanced settings
Configure advanced settings such as deduplication and encryption. I strongly recommend to use deduplication as it will drastically reduce the size of your backups.
Select Virtual Machines -> Take Backup and press Take Backup.
In order to take a backup to an offsite location, select Take Offsite Copy.
7. Follow up
Once the backup has completed, follow up how the backup went, using Reports -> Operations History.
If you go to the destination directory for your backups, you can verify the file size. Because of the deduplication, the VM backups are significantly smaller in size than on the source.
The total size of my virtual drives was 143 GB. The backup is 41 GB, which is a storage space save of 71%.
This can also be seen on the main dashbord when starting Altaro VM Backup v.7:
Restore VM backup
Full VM Restore
In most cases where the VM has stopped working for whatever reason, a Full VM Restore might be a good idea.
1. Select backup location
Start by selecting the backup location.
2. Select VM
Now, select the VM to restore.
3. Restore VM
Select the version of the VM to restore and press Restore.
File Level Restore
Select Restore Source
Start by selecting Restore Source.
Select Virtual Machine
Select the VM from which to extract the file(s) from.
Select Backup Version
Select the version of the backup that you wish to extract the file(s) from.
Select File(s) to Restore
Simply select the file(s) which you want to restore.
Extract files from backup
Almost there! Now you just need to select where to extract the file(s) to. Once selected, press Extract to extract the file(s) to the desired location.
Exchange Item Level Restore
Altaro VM Backup also support restore of individual e-mails from an Exchange VM using the feature Exchange Item Level Restore. I will not be going in to more detail in regards to this feature, as I do not have a source Exchange server.
If you want to verify the integrity of the backup data or perform a full test restore of a VM, this is possible using under the Sandbox & Verification section.
It is also possible to schedule the testing and verification of the backups, using Schedule test drills:
The first thing that hit me with Altaro VM Backup was how simple and easy to use it was..
Without referring to a user guide once during the process, I was able to backup my VMs and create the configurations I needed.
The built-in deduplication is also a nice feature as it saves a ton of space.
So in conclusion, Altaro VM Backup v.7 is a great solution if you want to have a hassle-free VM Backup experience.
If you want to have a look at Altaro VM Backup, you can download a 30-day trial here: http://www.altaro.com/vm-backup/download.php
About the author
Daniel Classon works as a Senior Consultant at Mansoft, focusing on Microsoft Configuration Manager, Windows 10 and Powershell
- How to install .NET Framework 3.5 on Windows Server 2012 and Windows Server 2012 R2 953,677 views
- Issue with mounting new ISO files from TechNet in Windows 8 and Windows 8.1 Preview 63,243 views
- Solution to OSD issue 80072ee7 29,701 views
- Powershell: Script to set Outlook 2010/2013 signature using information populated from Active Directory 31,058 views
- Guide: How to get PXE boot to work in Hyper-V 102,808 views
- Guide: How to force specific sites to always run in Compatibility View using Group Policy 138,281 views
- How to change between a Full Installation (GUI) and Server Core in Windows Server 2012 63,353 views
- Hyper-V: Issue when starting virtual machine from downloaded ISO file 7,170 views
- Guide: Solving WDS issue with DHCP port conflict 11,176 views
- How to check status of Bitlocker encryption on a client 114,950 views