Tag: issue

Blog, Configuration Manager Current Branch, Microsoft Deployment Toolkit

Error with patches stuck in download state when building a Windows 10 1607 image in MDT

INTRODUCTION The other day I was building a Windows 10 1607 image using Microsoft Deployment Toolkit and I ran in to an issue where patching the included Office 2016 was getting stuck at the downloading phase.     SOLUTION The solution is to apply the latest Windows 10 1607 Cumulative Update during the Windows PE phase. Here is how you accomplish this: Download the latest Windows 10 1607 Cumulative Update. As of writing this post, KB3193494 is the one you…

Daniel Classon, 2 years ago 0 1 min read
Blog, Configuration Manager 2007, Configuration Manager 2012

SCCM Deployment Issue Without Kernel-Mode Driver Framework 1.11

INTRODUCTION Have you seen this error when trying to deploy a new machine model? “Windows could not configure one or more system components. To install Windows, restart the computer and then restart the installation.” It is most likely due to the fact that the base image is not updated with the latest Kernel Mode Driver a Framework, which currently is 1.11. You can download the hot fix separately here:http://support.microsoft.com/kb/2685811 This patch is also included in the latest Windows Update patches,…

Daniel Classon, 5 years ago 3 1 min read
Blog, Configuration Manager Current Branch

Solve SCCM Error “sending with winhttp failed; 80072ee7” in Windows PE

INTRODUCTION I’ve had some problems recently with deploying clients in my lab environment. The problem I was having was this: Client boots up and receives boot image = Fine Client loads Windows PE = Fine Client restarts as soon as Windows PE loads = NOT FINE I started up the installation again and pressed F8 before the computer restarted and went to X:\Windows\Temp\SMSTSLOG\smsts.log and had a look. In the log I found this error: Unknown host (gethostbyname failed)sending with winhttp…

Daniel Classon, 7 years ago 28 1 min read
WordPress Theme built by Shufflehound.